NEW – Labconco REDISHIP 6′ Purifier Logic+ Class II A2 Biosafety Cabinet

The Labconco REDISHIP 6′ Purifier Logic+ Class II A2 Biosafety Cabinet (Product Number: 302619101) uses the same ECM blower technology as the Purifier Logic®, the Logic+ Constant Airflow Profile™ (CAP) to maintain a precise volume of air as the filters load. In addition, the cabinet will continuously display the HEPA filter life remaining and cabinet status. These features combine to provide unparalleled safety.

The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels 1, 2 and 3. These biohazard cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory.

Specifications

• Product Subcategory: Class II, Type A2 Biological Safety Cabinets
• Nominal Width: 6′
• Protection Type: Product and Personnel
• Nominal Sash Opening: 10″ (25 cm)
• Region: U.S. and Canada
• Base Stand: Required (not included)
• Conformance: ADA, CAN/CSA C22.2, ETL, NSF 49, UL
• Exhaust Volume: 503-554 CFM
• Lighting: Fluorescent
• Power Cord & Plug: North America, 115V, 20A
• Estimated Shipping Weight: 805.0 lbs (365.1 kg)
• Dimensions: 78.3″ W x 31.2″ D x 61.7″ H inches  (198.9 x 79.2 x 156.7 cm)
• Interior Workspace dimensions: 72.5″ x 17.6″ x 29.2″ front grading back to 25.7″ in the rear.
• Electrical: 115 volts, 60 Hz, 16 amps

Environmental Conditions

• Indoor use only.
• Ambient temperature range: 41° to 104°F (5° to 40°C).
• Maximum relative humidity: 80% for temperatures up to 88°F
  (31°C), decreasing linearly to 50% relative humidity at 104°F (40°C).
  Main supply voltage fluctuations not to exceed ±10% of the nominal
  voltage.
• Transient over-voltages according to Installation Categories II
  (Overvoltage Categories per IEC 1010). Temporary voltage spikes on
  the AC input line that may be as high as 1500V for 115V models and
  2500V for 230V models are allowed.
• Used in an environment of Pollution degrees 2 (i.e., where normally
  only non-conductive atmospheres are present). Occasionally,
  however, a temporary conductivity caused by condensation must be
  expected, in accordance with IEC 664.